I got around to set up the 120 GB SSD on the quad. I ended up making my own power cable with header wires to connect to +5 and Ground pins. I could not find a power connector that fit it J12 on the board at the local stores and didn’t want to order a small part online and pay for shipping.  What I have works.

The process was rather painless at first. I followed the procedure for creating a bootable image via OSX as described at the Udoo website. I then booted the board with the newly imaged SD card with the SSD connected to the board. I then installed gparted via

then ran

to partition the SSD and also create another partition on the SD card for backing up stuff since I had about 23 GB extra on the card to use.

Continue reading